MHV220A by Banjo | Manifold Flange Connections | 2" Full Port Manifold Inductor | Volume Draw: 49 GPM | Opening Size: 9/16" | Pressure at Pump: 225 PSI | Polypropylene | Pack of 5 FKM Flanged Clamp Gaskets - Black Part Number Hose Size "T"

Part Number Hose Size "T" Thread A D EØ H FJ9707-0404S -04 9/16-18 1

86" FF2209T0606S - - - - - FF2209T0612S 0

Part Number Male Acme Male NPT ME217S 1-3/4" 1-1/4" ME233S 2-1/4" 1-1/4" ME503S-16 3-1/4" 2"

Part Number Description End Type Opening Thru Ball Max PSI Handle Type Package Quantity 4 Bolt Side Load Manifold Valves MV100SL Full Port 1" Flange x 1" Flange 1" 300 PSI T Handle 1 MV200SL Standard Port 2" Flange x 2" Flange 1-1/2" 225 PSI Straight Handle 1 MV220SL Full Port 2" Flange x 2" Flange 2" 100 PSI Straight Handle 1

MHV220A by Banjo | Manifold Flange Connections | 2" Full Port Manifold Inductor | Volume Draw: 49 GPM | Opening Size: 9/16" | Pressure at Pump: 225 PSI | Polypropylene | Pack of 5 FKM Flanged Clamp Gaskets - Black Part Number Hose Size "T"Applications: Fluids Features: Threaded or manifold ends Glass reinforced polypropylene Note: Each venturi comes in two pieces Note: The inductor is designed for use with a volume pump. Typical volumes and pressures used to operate the venturi would be in the 80 to 240 US GPM range at pressures from 26 to 52 PSI Note: US GPM. Tests done with water at ambient temperature. Pump used for test was a 2" Banjo (5 vane impeller) driven by a 5. 5 hp Honda gas