Standard Spring Probe (Electro-mechanical) Wintriss Repair Parts aimed in the same direction

aimed in the same direction

This sensor has an unthreaded housing and should be epoxied into a slip-fit hole

If clearance is an issue

Pin #1 - +24V Sensor Power (Brown wire)

Standard Spring Probe (Electro-mechanical) Wintriss Repair Parts aimed in the same directionThe Standard Spring Probe is one of the oldest and most versatile sensors used for die protection. Its operation is simple: The spring is connected to a terminal that is wired to a die protection input. The whole assembly is contained in an insulated plastic block. When a piece part, the coil stock, or tooling contacts the spring, it provides an electrical path to earth ground, which is detected by the die protection control. The Standard Spring Probe