KM162 by Dixon Valve | King Hose Mender/Splicer | For Two Clamps | 2" Hose ID x 2" Hose ID | Steel DKO Female Swivel Heavy Duty 90 deg. Elbow Part Number 25 ft Reels

Part Number 25 ft Reels Inside Diameter Wall Thickness (In) Centerline Bend Radius (In) Compression Ratio Negative Pressure (In/Hg) Working Pressure (PSI) Weight - 25ft (Lbs/Ft) AWP-W 8in 8" N/A 5" 10:1 N/A 3 10 lbs AWP-W 10in 10" N/A 6" 10:1 N/A 2 15 lbs AWP-W 12in 12" N/A 7

32" GG110-NP08-06 0

Smooth bend radius

25" FF14401 22546-17 FF90178-17 FJ3288-07-1012S 7/8-14 -12 4

KM162 by Dixon Valve | King Hose Mender/Splicer | For Two Clamps | 2" Hose ID x 2" Hose ID | Steel DKO Female Swivel Heavy Duty 90 deg. Elbow Part Number 25 ft ReelsSafety Notes: Menders are not for compressible products such as air, nitrogen or steam. The working pressure may vary with the construction of the hose, the type of clamping system used and the application. In accordance with the R. M. A. bulletin for oil suction and discharge hose, a coupled length of hose in any size, should be tested to 1 1 2 times the working pressure and held for fifteen minutes without leaking or coupling movement. For