RM2 by Dixon Valve | Short Shank Mender/Splicer | 1/4" Hose ID x 1/4" Hose ID | 2-1/32" Length | 316 Stainless Steel M-Series ARO Interchange Nipples (Standard Hose Barb) Part Number Tube Size Pipe

Part Number Tube Size Pipe Size Straight Thread Hex 46F-4-4 1/4" 1/4" 7/16"-20 11/16" 46F-6-4 3/8" 1/4" 5/8"-18 11/16" 46F-6-6 3/8" 3/8" 5/8"-18 13/16" 46F-6-8 3/8" 1/2" 5/8"-18 1" 46F-8-4 1/2" 1/4" 3/4"-16 3/4" 46F-8-6 1/2" 3/8" 3/4"-16 13/16" 46F-10-6 5/8" 3/8" 7/8"-14 7/8"

68" 9/16" 1AA6FJB6 1AA6FJB6TZ 9/16-18 -06 2

030" 1725 lbs 300ft/Roll 15

316 SS Uncoated

RM2 by Dixon Valve | Short Shank Mender/Splicer | 1/4" Hose ID x 1/4" Hose ID | 2-1/32" Length | 316 Stainless Steel M-Series ARO Interchange Nipples (Standard Hose Barb) Part Number Tube Size PipeSafety Notes: Menders are not for compressible products such as air, nitrogen or steam. The working pressure may vary with the construction of the hose, the type of clamping system used and the application. In accordance with the R. M. A. bulletin for oil suction and discharge hose, a coupled length of hose in any size, should be tested to 1 1 2 times the working pressure and held for fifteen minutes without leaking or coupling movement. For