KM82 by Dixon Valve | King Hose Mender/Splicer | For Two Clamps | 1" Hose ID x 1" Hose ID | Steel pl_hammer-unions or 50ft of 1/2" Air

or 50ft of 1/2" Air / Water 500 PSI 7800MP 50ft of 3/8"

47" 2070-20-20S 1

5 lbs Flex-Lok 300 10in 10" N/A 7" 8:1 2

50" 3330X8 1/2" 0

KM82 by Dixon Valve | King Hose Mender/Splicer | For Two Clamps | 1" Hose ID x 1" Hose ID | Steel pl_hammer-unions or 50ft of 1/2" AirSafety Notes: Menders are not for compressible products such as air, nitrogen or steam. The working pressure may vary with the construction of the hose, the type of clamping system used and the application. In accordance with the R. M. A. bulletin for oil suction and discharge hose, a coupled length of hose in any size, should be tested to 1 1 2 times the working pressure and held for fifteen minutes without leaking or coupling movement. For