Schrittmotor: unipolar/bipolar, 200 Schritte/Umdrehung, 57 x 56 mm, 3,6 V, 2 A/Phase hub-sensoren a larger capacitor might be

a larger capacitor might be required

Note that the potentiometer has no physical end stops

can be reduced to 10 µA to 20 µA per volt on VIN by disabling the board

Can also be configured as a FIFO interrupt

Schrittmotor: unipolar/bipolar, 200 Schritte/Umdrehung, 57 x 56 mm, 3,6 V, 2 A/Phase hub-sensoren a larger capacitor might beThis high torque hybrid stepper motor has a step angle of 1. 8 (200 steps revolution). Each phase draws 2 A at 3. 6 V, providing a holding torque of 9 kg cm (125 oz in). The motor features six color coded wires with bare leads, allowing it to be driven by both unipolar and bipolar stepper motor drivers. When used with a unipolar driver, all six wires are used. When used with a bipolar driver, the yellow and white wires in the center can remain