headstock bearings and seals ktm supermoto 950 2005 2007 Honda XR125 This ignition coil has been

This ignition coil has been manufactured to replace the original coil pack on a Honda VN1500 for the years and models shown above

This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Yamaha FJ1100 for the years and models shown above

and you'll get the spark you've always wanted

The seal thickness is approximately 2mm each

headstock bearings and seals ktm supermoto 950 2005 2007 Honda XR125 This ignition coil has beenBrand new set of headstock steering bearings and seals to fit: KTM Supermoto 950 (2005 2007). This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a KTM Supermoto 950 for the years and models shown above. Top sized: 29mm x 50. 25mm x 15mm. Bottom sized: 29mm x 50. 25mm x 15mm. All sizes set out ID x OD x Thickness. The seals are not included in the measurements. If you